Dual shower head systems include two shower heads in one single unit: a fixed shower head and a hand-held one. The two-in-one setup means you can personalize or customize your shower experience depending on your preference and mood, alternating between the fixed head and the hand-held head.

Many digital showers range like low water shower heads also permit you to have both showers on at the same time. Dual showers are intended for those looking to increase a second showerhead to their restroom. There are various types of double batteries, depending on the requirements and preferences of each person.

Firstly, place one shower head on the wall, similar to a conventional shower head installation, with the second showerhead facing the finishing end of the extended hand.

They can be easily adjusted and work up and down and even in or out. Secondly, the double bar shower head positions both showerheads nearby to the wall and side by side.

All dual shower head systems can be with no trouble attached to your existing plumbing without any tools (a simple wrench may be compulsory to remove your old showerhead).

Reasons why you should Ponder a Dual Shower head in Your Home

Here are some good reasons which will surely convince you to install a showerhead in your washroom.

• Spa-like experience: Enjoy a luxurious spa-like experience with a dual shower head system. The fixed head provides a relaxing, full-body spray, while the hand-held head offers targeted massage sprays.
• Increased flexibility: Two shower heads allow for personalized shower experiences. Control settings separately to enjoy different spray types. The hand-held option is ideal for avoiding wet hair.
• Enhanced practicality: In addition to the luxurious benefits, dual shower heads offer practicality. Use one head to clean the other or effortlessly scrub your bath or shower enclosure.

Here’s How to Install a Dual Shower Head

In this part of the guide, a dual shower head is referring to two shower heads connected at the same pipe connector. This can mean a head plus hand-held combo, just like the which easily allows and enables you to use one or both simultaneously.

After going through all the necessary information regarding the showerheads, we would like you to know the easiest way to install the dual shower heads in your washroom. We will guide you through steps so that it would be very easy to understand the process and you don’t have to regret it afterward.

Step 1 – Turn Off the Water Supply

Always initiate by turning off the water supply.

Step 2 – Remove the Current Shower Head

Carefully remove the current showerhead by rotating it on the head and holding the arm with a wrench and plier.

Step 3 – Remove the Rust

After taking out your old showerhead, you have to make sure that there are no leftovers of tape or any other residue as it might cause problems for the new one. Also, ensure that there is also no rust developed on the pipe.

Step 4 – Detect the Switching valve

After that, first put the base valve. This is a minor rectangle piece that will attach to both the central head and detachable showerhead. It is also the point where the switching valve is positioned.

Step 5 – Wrap the Shower Arm’s

You also have to be sure that you perfectly wrap the shower arm’s joining threads in new plumbing tape for proper closure from any sort of leaks.

Step 6 – Wrap thread in Plumber’s

Next, carefully wrap the valve’s threads in the plumber’s tape and add on the chief shower head. Make sure you are correctly tightening it on by means of pliers and cloth as a perfect scratch-resistant barrier. I was hoping you could make sure everything is clean before the process proceeds.

Step 7 – Attach the Extending Rope

Lastly, attach the second mobile showerhead by attaching it to the extending rope pipe and then fortifying the wand showerhead onto it. Make sure you are packaging a good amount of plumber’s tape on each of the joining threads you encounter.

Step 8 – Turn On the Water

Turn on the water to check and test the showerhead for any leakage. In case of any leakage, eliminate the troubling area, wrap on more plumber’s tape, and tighten it down once again.

How to Install Two Shower Heads

Installing two shower heads provides you with multiple options for a luxurious shower experience. You can choose a rainfall showerhead for a soothing rain effect and have a handheld showerhead for added convenience. No need for ceiling modifications or hiring a plumber.

Enhance your rainfall showerhead by installing an extended shower arm. Mount a shower wand holder on the wall for easy access. It’s a straightforward process with the right tools, offering a secure hold compared to suction cup holders.

Let’s move towards the easy way to install two showerheads.

• Step 1: Firstly, use a stud finder to detect and mark the stud outline with a pencil on your tile.
• Step 2: Use a glass and tile drill bit and set your drill to a plodding speed. Going slower will undoubtedly help you not to pop the tile.
• Step 3: Mark and line up with a pencil the spot where you want to place the screw in the holder.
• Step 4: Use a drill bit to create screw holes in the wall, penetrating the tile and gently hitting the wood stud behind. Clean the bathroom with a tile mop to remove any debris from drilling. Ensure to use certified or homemade cleaners for the restroom.
• Step 5: Place your holder and put the screws into the pre-drilled holes.
• Step 6: Lastly, tighten and slide up any decorative plates that will hide your screws.

Can you add a second shower head?

Yes, you can add a second showerhead. But keep in mind that you will have to at least refer a professional at your local home store before you land on to the final decision due to the behind-the-wall invasive steps.

Does the dual shower head use more water?

If you are using both showerheads at the same time, the probabilities are that users will be more than the regular of 2.5 GPM, which is standard for a single showerhead.

Though, using efficiency-boosting designs or high-water pressure can eradicate this issue. If you open just one shower head at a time, utilizing more water shouldn’t be a problem.

How far apart should two shower heads be?

It is suggested that you should use at least 3 feet of spacing amid shower heads that are on a similar wall to give each person sufficient room to maneuver freely, but again this is up to the individual comfort level of the couple in question.

Can you use two showers at the same time?

Generally, yes, but that really be subject to the flow rates of your showerheads and the coming water temperature.

How much actually does it cost to install a second showerhead?

This totally depends on your location; labor costs for a modest showerhead replacement will approximately run between $75-$150. You can assume to pay more if you also wish to make repairs or plumbing changes at the time of installation.